Yadda ake amfani da nuni na LED

2021/04/14

BabbaNunin LED screens are the same as traditional electronic products. Not only do you need to pay attention to the method during use, but also need to maintain the display screen in order to make the life of the large Nunin LED screen longer. Here, Changcai Electronics will analyze several ways to maintain the large screen of LED full-color display for everyone.
1. Rike laima na yanayin inda cikakken launiNunin LED is used, and do not let anything with moisture into the full-color Nunin LED. Powering on a full-color display that contains humidity will cause corrosion of the components of the full-color display, resulting in permanent damage.
2. Don kaucewa matsalolin da za'a iya fuskanta, zamu iya zaɓar kariya ta kariya da kariya mai aiki, yi ƙoƙarin kiyaye abubuwan da zasu iya haifar da lalata allon nuni mai cikakken launi nesa da allon, kuma lokacin tsaftace allo, goge shi a hankali kamar yadda zai yiwu don kauce wa lalacewar. Yiwuwar an rage girmanta.
3. Babban allon na LED mai cikakken launi yana da mafi kusancin alaƙa da masu amfani da mu, kuma yana da matukar buƙata a yi aiki mai kyau cikin tsaftacewa da kulawa. Fitar lokaci mai tsawo zuwa muhallin waje kamar iska, rana, ƙura, da sauransu zasu zama da datti cikin sauƙi. Bayan wani lokaci, allon zai zama ƙura. Wannan yana buƙatar tsaftacewa a cikin lokaci don hana ƙurar da ta kunsa farfajiyar na dogon lokaci don tasiri tasirin kallon.
4. Ana buƙata cewa samarda wutar lantarki ya tabbata kuma kariyar ƙasa tana da kyau. Kada kayi amfani da shi a ƙarƙashin yanayi mai tsanani, musamman tsawa mai ƙarfi da walƙiya.
5. An haramta shi da shiga ruwa, hoda na ƙarfe da sauran kayan ƙarfe masu sauƙi a cikin allon. BabbanNunin LED screen should be placed in a low-dust environment as much as possible. Babbadust will affect the display effect, and too much dust will cause damage to the circuit. If water enters due to various reasons, please cut off the power immediately and contact the maintenance personnel until the display panel in the screen is dry before use.
6. The switch sequence of the Nunin LED: A: First turn on the control computer to make it run normally, then turn on the large Nunin LED; B: Turn off the Nunin LED first, then turn off the computer.
7. Kar a zauna a cikin farin fari, cikakke ja, cikakke kore, cikakken shuɗi, da dai sauransu na dogon lokaci yayin sake kunnawa, don kauce wa wucewar yanayi, dumama wutar igiyar wuta, lalacewar hasken LED, da tasiri. rayuwar sabis na nuni. Karka rarraba ko rarraba allon yadda kake so!
8. Ana ba da shawarar cewa babban allo na LED yana da lokacin hutawa fiye da awanni 2 a rana, kuma ya kamata a yi amfani da babban allo a kalla sau ɗaya a mako a lokacin damina. Gabaɗaya, kunna allon aƙalla sau ɗaya a wata kuma kunna shi sama da awanni 2.
9. The surface of the large screen of the Nunin LED can be wiped with alcohol, or use a brush or vacuum cleaner to remove dust. It cannot be wiped directly with a damp cloth.
10. The large Nunin LED screen needs to be checked regularly for normal operation and whether the circuit is damaged. If it does not work, it should be replaced in time, and the circuit should be repaired or replaced in time if it is damaged. Non-professionals are forbidden to touch the internal wiring of the Nunin LED to avoid electric shock or damage to the wiring; if there is a problem, please professionally repair it.